how to make the blackboard of your violin shiny

How to make a violin step by step?

Oct 08, 2005 · Forget it, it can`t be done and you wouldn`t want to do it even if you could. Cheap new violins are shiny because they are finished with sprayed-on nitro varnish. Revarnishing a violin with that, even of you could do it, would merely send it`s value down through the floor. Re: how to shine your violin? 01:36 on Sunday, October 9, 2005.

How thick should wood be for a violin back?

Aug 05, 2020 · Index of videos - English: https://davidesora.altervista.org/videos/ Italiano: https://davidesora.altervista.org/video/To go de...

What kind of wood is used to make violins?

Mar 01, 2021 · Loosen the tuning peg at the top of the violin string and remove the string itself. You will then need to remove it from the tailpiece or fine-tuner. You must make sure that you don’t scratch the varnish of the violin with the ends of the strings which can be very sharp. Lubricate Your Tuning Peg Now you can remove the peg from your peg box.

Why are violins so shiny?

Dec 10, 2014 · Want your board to shine? Add a few drops of lemon oil to a soft cloth. Place the cloth in a sealed, plastic bag and allow it to set overnight. Rub the cloth over the board the following day for a beautiful finish. While it can be tempting to wash a blackboard every day to keep it clean, it is not good for the board itself.

How do I make my violin shine?

0:192:21Violin Basics : Violin Polishing - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's important not to directly pour polish under the varnish under the instrument. And rub out theMoreIt's important not to directly pour polish under the varnish under the instrument. And rub out the smudges rub out the rosin robot the dirt.

What can I polish my violin with?

Although you can use a French alcohol or French Polish technique at home, it's better to have a professional polish your violin with these techniques if you aren't 100% sure that you can do it correctly. The French alcohol polish method involves using mineral oil and ethyl alcohol.Mar 6, 2017

Can you use guitar polish on violin?

Guitar polish can damage a violin's varnish finish and should never be used on a violin. Guitars have a hard lacquer finish that can withstand the chemicals found in guitar polish. However, violins are finished with a varnish made for violins that help enhance the violin's sound.

How do you French polish a violin?

6:0410:57Adventures in Violin Repair - Part 4 - French Polishing (reposted)YouTubeStart of suggested clipEnd of suggested clipJust kind of disappear off behind after it leaves a little spot of the shellac. Just kind of buffingMoreJust kind of disappear off behind after it leaves a little spot of the shellac. Just kind of buffing. It in little circles.

Can I oil my violin?

The varnish is there to protect the wood, so take care to keep the varnish layer safe. If you want to clean your violin while adding some shine back to the polish, try using a very small amount of olive oil or almond oil with a little tripoli powder on your cloth.May 13, 2021

How do you clean rosin off a violin?

If you're removing rosin or sweat build-up from your strings, you can use pure alcohol or a special string cleaner to remove this. Put a drop or two on a paper towel and gently wipe up and down the strings. Be careful to ensure the alcohol doesn't touch any other part of the violin!

Can I clean my violin with alcohol?

Is it safe to clean my violin with alcohol? You should never use cleaning solvents, alcohol, hand sanitizer, or alcohol-based solvents on the wood of your violin. Alcohol compounds can easily damage the varnish on your violin.

How often should I polish my violin?

For best results, keep your violin free from rosin and dust on a daily basis by cleaning a violin with a clean soft cloth at the end of each practice session. Use my Luthier's cleaning method every once in a while as needed to really give your violin a sparkle. 1.

Can you use beeswax on violin?

No, it will ruin your bow hair and doesn't work. It would likely have the very opposite effect that you're intending. I've never heard of rosin containing beeswax until now, and apparently it's only an extra ingredient used in some but not all rosins.Apr 14, 2019

How do you varnish a violin?

VarnishingPut one coat of Madder tincture on the back of the violin. ... If the color looks good to you, apply to the remaining parts of the violin.Let dry for at least an hour or two otherwise you risk dissolving the last layer when putting on a fresh one.Repeat until you think its red enough.More items...

What is rosin remover?

About this Item. Removes rosin build up without damaging the instrument's finish. Use a small amount on a soft cloth and gently wipe away rosin dust. 1.7oz bottle. Cannot be shipped outside of the U.S.

How do you use spirit varnish on violin?

2:588:13Spirit Varnishing - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou always want to start in the middle and work pull the varnish from the middle out to the ends.MoreYou always want to start in the middle and work pull the varnish from the middle out to the ends. Just like that. You'll see that once we get to the back in the top.

What should the bridge of a violin be?

The bridge of your violin should be straight. The back of the bridge which is the part that faces the tailpiece should be completely perpendicular to the wooden surface of the instrument. The feet of the bridge should also be flush against the violin too. If you notice that the feet of the bridge lie flat but the bridge appears to be warped, you will need this changed by a professional.

How to string a guitar tailpiece?

Take your string and run it between you thumb and index finger so that any twists are removed before you attach it to the tailpiece. You need to attach the ball end to the tailipiece or fine tuner. Some people may think they need to pre-stretch the strings before putting them into place but we would recommend that you let the strings stretch out on their own and settle more naturally.

Can you change a soundpost at the same time?

Before you begin it’s important to know that you have to change one string at a time. Removing all of them at the same time will cause your soundpost to drop. This will make it nearly impossible to set your bridge back in the right place. Let’s get started.

How to clean a chalkboard?

The less that’s on there to begin with, the easier the cleaning will be. Fill the bucket with warm water. If the chalkboard is really dirty, add 1/2 cup of vinegar to the water for some extra cleaning power. Moisten a soft cloth with the water.

How to clean a squeegee board?

Fill the bucket with warm water. Add one half cup of vinegar to the water. Use the window squeegee to spread the water and clean the board. Window squeegees are relatively cheap and are available online or at hardware/home improvement stores. Slide the squeegee across the board to remove the water.

How long do chalkboard cleaning cloths last?

They are designed to remove the chalk dust more efficiently. They are reusable and typically last a year with normal use.

How to clean a sanded sandboard?

Start at the top corner and wipe straight across to the other top corner. Turn or fold the cloth so you have a clean wiping surface. Move the cloth down and wipe across again. Keep using a clean portion of the cloth, rin sing as needed. Continue with this “stripe” cleaning method until the entire board has been wiped.

Can you wash a blackboard every day?

Rub the cloth over the board the following day for a beautiful finish. While it can be tempting to wash a blackboard every day to keep it clean, it is not good for the board itself. Constant exposure to water can result in a damaged board that will become increasingly difficult to clean.

Can you clean a blackboard with chalk?

Wet chalk dries to the board and can be difficult to remove. While there are a variety of chemicals and soaps that can be used to clean blackboards, select your cleaners carefully.

Why are violins shiny?

Some violins are shiny because of a lacquer or polyurethane finish. These are usually student instruments, and they are lacquered for durability. There is also a nitrocellulose varnish, which dries to a hard gloss. I understand that the best finish for a string instrument is a spirit varnish, as it is flexible and expands and contracts with the wood. I believe a spirit varnish has a satin look to it. Most high end instruments will have an oil varnish, which never really dries and takes a long time to apply. The theory there is that it treats the wood, but I have no real proof on that.

Why are violins hard to light?

remember a WHOLE lot of effect can come from just how the lights are placed. Violins are pretty hard to light because of all the curves and the varnished surface ... IMO some of the shine may be just glare.

What is French polish?

French polish is the method of application. Basically, it sort of buffs an extremely thin layer into the surface and rejuvenates the surface without adding much to it. It is a woodfinishing term rather than a luthier's term. The process is used to add a glassy finish to something like a table top.

How to measure f holes on violin?

The f-holes on most violins are asymmetrical (even on Stradivari’s instruments). Measure where you’d like your f-holes to go using a compass and measurements from your model. Cut four holes (at each end of both f-holes). Join the top holes with the bottom holes with a template – as shown below.

What are the measurements of Alastair's violin?

The measurements for this particular violin are as follows: Back 350mm. Upper bouts (bits round the top) 164mm.

How to make a scroll with pinpricks?

Make the scroll and neck. Using a template, use pinpricks to create the outline of the scroll shape. Then drill the peg holes into the scroll. Now, cut the scroll out using a saw. Then use gouges to carve your scroll.

What wood is used in Alastair's ebony?

Alastair decided to keep it very simple here. Traditionally makers used pear wood and ebony – but he uses fibre as it’s easier to work with and bends without cracking).

What wood should I use for ribs?

The best wood to use is Balkan maple for the ribs, the back and the scroll – as it’s both dense and light; and Spruce for the front (or belly).

How many coats of varnish do I need for a dragon's blood?

On top of that use coatings of a varnish which includes dragon’s blood (a bright red resin from a tree). You'll need to do about 15 coatings in all, depending on the depth of colour you want to achieve. Then leave your instrument outside, if it’s sunny, or put it in a UV box so the colour develops.

When did John Williams make his first violin?

He also makes violins in his spare time. He made his first violin at the age of 14 with the help of one of his teachers at Chethams school of music. We asked him to take us through the process, from the moment the wood arrives to the finished instrument.